AMVR Controller Strap Grips Cover Compatibile con Meta/Oculus Quest 3 accessori, Batteria Apertura Cover, Silicone Protezione con Cinturini Nocche (non per il dock di ricarica)

Ottimamente realizzate.Prima si monta una piccola struttura al posto del coperchio batterie, il quale presente un piccolo gangio superiore che serve a incastrarsi sulla protezione e tenerla stabile nella parte superiore, che altri menti scivolerebbe via. Poi si monta la protezione vera e propria: sul fondo c’è il buco per far passare il laccetto di sicurezza, sul lato lo sportellino per la sostituzione rapida della batteria.Il controller è ottimamente protetto, lo ricoprerei.

Sono una persona precisa, che se compra qualsa la vuole fatta bene! Comprati sotto consiglio di un amico, e sono fantastici! Comodi, miglioramento notevolmente l’impugnatura, e dentro alla confezione c’è anche il nuovo coperchio per la batteria! Cosi da non dover mai togliere la copertura anche per l’eventuale sostituzione di batteria scarica! Prendeteli e andate sul sicuro!

Fantastiche consigliate N. 1

Well thought design
They fit like gloves and feel very comfortable. You can keep the original wrist strap as extra security and the battery compartment is accessible without having to take the grips off. No worries about flying controllers.

Easy installation and fits great
Probably not the cheapest but they fit so well, easy to install and a great improvement, not having to hold on to the controllers is a massive improvement to the way you play, so highly recommended.

If you like silicone grips these are very good
I’ve always been a fan of AMVR products and these grips are very well made. They are one of the few that don’t occlude the sensors at all, and also have a cut out for the sensor at the bottom of the grip handle. Tracking is not affected in the slightest.Fitting was easy. There is a custom battery cover which leaves the battery exposed so you can access it through a flap in the silicone cover, and it also has a locating tab to help keep the cover in position. You just fit the battery cover then slide the sleeve over the top and locate the tab on the battery door into a cutout on the sleeve. You then fit the battery over a supplied pull tab to help you remove it when needed (you also get spare tabs in the box). Then there’s a flap in the cover which clicks nice and snugly over the battery. It’s all very well thought out and feels good when fitted.The silicone is just the right hardness and feels nice in the hand. The straps are comfortable enough but quite firm with no stretch. Adjustment is via Velcro which is normal for these things. The straps hold tight and grip the knuckles without a problem. The silicone is quite thick and offers excellent protection (something i was grateful for after smashing them into a chair on a Bear Saber frenzy!) but it also adds thickness to the controller. This may or may not be a good thing depending on your hands. I have smallish hands and found them a bit chunky although you do get used to it after a while.The other problem with full body covers is that when the grip and trigger buttons are fully depressed they go below the level of the cover which means your fingers edges kind of catch on the rubber as you push them in. Initially this really niggled me but after a period of adjustment I didn’t really notice it any more. Neither of these things are a fault with this product, just a side effect of having full body covers.It’s a shame white ones weren’t available as having black controllers kinda triggers my OCD but you don’t see them in VR so i guess it doesn’t matter.Another thing I noticed was that AMVR seem to have stopped using press studs to secure the straps to the grips. They are now riveted meaning it would be much more difficult to replace the straps down the line.Overall these are some of the best silicone covers I’ve seen. I would definitely recommend them.

A Must Have!
These hand grips make me feel very secure when playing games on my Quest 3 and make me feel at ease that I’m not going to throw the hand remotes across the room, or into something! It allows you to feel more immersed in the VR environment because you don’t have to consciously think about not letting go of the remotes. The system is designed very well, the installation is very simple and the design is very ergonomic and also stylish. They are easy to adjust, and to slip on and off if you want to enter hand-tracking mode.

Genialer Komfort
Sehr leicht über die Controller zu stülpen.Das Spielen wird ungemein vereinfacht.Die Schlaufe am unteren Ende des Controller wird gar nicht mehr benötigt. Die Griffe der Abdeckung reichen vollkommen aus.. Kein Schwitzen und super griffig. Optimal auch z.b. für Tischtennis VR.

Perfekt!
Top verarbeitet, liegen gut in der Hand!Mein Tipp, zieht die Schlaufen luftig locker und nicht fest an dann gibt es keine Druckstellen und die Controller liegen auch viel besser in der Hand 😉

Parfait pour les controllers du Quest 3
Facile à installer. Fonction grip. Réglable pour une parfaite adhérence dans les mains.La trappe inclue pour le changement des batteries est vraiment appréciable. Je ne l’avais pas sur les protections de mon Quest précédent et c’est ce qui a motivé mon choix. Pas besoin de retirer le silicone.

Bye bye quest pro controllers!
Let me first start off by saying I don’t normally write reviews, but I had to put this out here because I’m throughly impressed by this product. I’ve been using my quest pro controllers for the quest 3 and I have never found a grip cover that was completely comfortable, and always had to stop and adjust the covers to realign them to the cameras and buttons. Switching to these grips meant I had to also switch to use the quest 3 controllers. However, these grips are such a great fit, so comfortable, and simply an ingenious design, with easy access to the battery, and no slippage or loss of tracking, it has made me ditch the quest pro controllers permanently. Hats off to the designers of these grips, these are a showcase of great design and engineering.

Regarding the metal button issue some people are experiencing
These are honestly some of the best grips you can buy for the price point . Top quality and they fit so perfect .Some people seem to have discomfort with the metal button on the top of the strap , I experienced it too for the first 30 minutes.. you simply just have them on WAY too tight. After loosening the straps a decent amount while still having them secure enough that they don’t move around on my hand, theyre 5* comfort as well.

Needed Upgrade for Quest 3 Controllers
Meta really is just throwing away opportunities by not having reasonably priced accessories. These are a great example. Quest 3 by default comes with a looped string. This means you can let go of the controllers but they’ll hang around your wrist rather than stick to your hand. The alternative is constantly gripping the controllers for long periods of times.Overall these are very aesthetically pleasing, and pleasing to touch. They seem robust and the battery door can be convenient. Though with the Quest 3 controllers having one end of the batter contact be retractable means the pressure it puts on the battery and the tight compartment can mean even with the ribbon looped underneath it can be difficult to remove the batter.

ein Must als Verbesserung
Die Controller der Meta Quest 3 werden, wenn man Sport oder bewegungsreiche schweisstreibende Apps spielt, ziemlich rutschig. Da sie kleiner als ihre Vorgänger sind, muss da arg aufgepasst werden – die Schlaufen sind da auch keine große Hilfe. Da der Klettverschluss bei den Kiwi Griffgummis für meine alte Quest nach kurzer Zeit nicht mehr funktionierten, habe ich nach einem anderen Hersteller gesucht. Zudem wurde bei Billigprodukten für die MQ3 von der Problematik mit verdeckten Sensoren berichtet. Also habe ich mir diese Teile gegönnt und bin (noch) restlos begeistert. Sie sind durchdacht, machen einen wertigen Eindruck und liegen optimal in den Händen – die allerdings bei mir relativ klein sind. Der Gripp ist toll und es gibt sogar Ersatz für die Batterie Strips. Volle Punktzahl, falls sich etwas ändert, werde ich entsprechend ergänzen.

Comfy but tricky
Very comfortable to hold, especially for people like me who have sweaty hands. They are a bit tricky to get the straps loosened to get the controllers off to take off the headset.

Straps hold my hand tightly, battery replacement is much easier now.
Takes a bit of time to put both of the pieces and thread the original string through the new handle, but it’s worth it. Very comfortable, pull tab makes it easy to pull out the battery. When playing games with a lot of rapid hand movement, it occasionally feels like the cover is slipping off the controller, but it’s snug again after a second or two. Top stars (4 out of 5) from me. Good value for the price.

Easy to adjust.
The kids are very happy with these. They go on the hand units easily and are comfortable to the touch.

Super Zubehör für die Quest3 Controller
Die Teile sind einfach anzubringen. Bei Benutzung super Grip, so dass die Controller beim Spielen gut in der Hand liegen.Das Batteriefach ist ein super Feature. Die Batterien in den Controllern lassen sich so super schnell wechseln.

Great product and easily trackable
These are a great strap for the Oculus 3. One of my biggest concerns was finding a strap that grips well, while not obstructing the tracking lights on the controllers. This device does this perfectly. Plus, the easy access battery door is an added bonus. I highly recommend these grips.

Very pleased
Very pleased with these, they are super comfortable and offer decent all around protection. I’ve been using them for a few weeks and the tracking still appears to work perfectly. Perfect fit and feel good quality. Would definitely recommend.

Major Upgrade To Your Oculus 3 Controllers
As a seasoned VR gamer, I prioritize both immersion and practicality. AMVR’s Upgraded Controller Grips for the Meta/Oculus Quest 3 tick all the boxes, offering a significant upgrade over the stock controllers. Here’s a deep dive into their key features:Enhanced Grip and Control: The soft, textured silicone feels grippy and comfortable, even during intense Beat Saber sessions. The textured pattern effectively wicks away sweat, minimizing slippage. My controllers feel like extensions of my hands, not a potential projectile waiting to happen.Improved Ergonomics: The ergonomic design cradles my palms naturally, reducing fatigue and hand cramping during longer VR journeys. The strategically placed ridges provide additional support for the fingers, further enhancing control.Battery Access Hatch: A well-implemented hatch on the back allows quick battery changes without removing the entire grip. This small detail is a game-changer, saving precious seconds and minimizing VR immersion breaks.Knuckle Strap Security: The secure knuckle straps, with their adjustable velcro closures, provide peace of mind, knowing my controllers are firmly attached even during vigorous gameplay: no more accidental throws, just pure VR bliss.Minor Nitpicks: While near-perfect, there are some little points to consider. Firstly, the grips need to fit the official charging dock. This isn’t a deal-breaker, but it’s worth noting. Secondly, the battery hatch can be stiff to open initially, though it loosens up with use.Overall: AMVR’s Upgraded Controller Grips are a must-have for any severe Quest 3 user. They elevate the VR experience with superior comfort, control, and convenience. Highly recommended!

Would buy again
Very well designed and built, and feel premium. I would buy these again, but wish they had a bit of elastic give to them when you put on the straps. Noticed a bit of rubbing on top side of hand where the rivet holding the strap on sits against your hand, and I have small hands. Great overall, nice battery door feature with tab to easily pull out battery. Rubber has a nice feel that is easy to clean.

Great quality!
Very well made! Great protection for your Quest 3 investment. Keeps your controllers from flying through the drywall! Made of high quality thick silicone and a very rugged plastic battery cover/door. Really nice that it comes with “battery pull tabs” to make removing the battery a breeze! Definitely recommend purchasing this great item!

ok
super produit rien a dire

Beat Saber
This helps a lot for playing Beat Saber! The straps are great for preventing slippage which is awesome and there is no need to hold on to the controllers to tightly anymore. The quality of it is very soft which is the downfall for going to tight with the strap, it’ll pull the top part where it connects to away from the faceplate/button pad of the controller but it’s not necessary to go excessively tight, keeping it in a just right spot that prevents it from pulling away feels like it holds perfectly anyway. I don’t play high speed maps all the time so I’m unsure of the reliability of the battery cover, it does feel like there’s a gap between the battery and it’s cover so there is a possibility of battery disconnect but it hasn’t happened to me after 5 ish hours of testing them.I definitely recommend this grip cover for Beat Saber!

Best accessory you can buy for the Quest 3
The best handgrips for the Quest 3. Amazing quality, fit and functionality. Access to the battery is brilliant. Worth every penny.

Its worth every cent
I bought this controller grip cover especially because I like to play workout games (like Synth Riders), and when my hands are sweaty I lose the grip and the controllers slip, impairing performance, as well as being quite annoying.The material seems good and doesn’t have bad smell.Another good thing about this product is that the cover increases a little bit of weight to controllers (in my opinion is too much light). Now it’s better!The strap to remove the battery is working fine.About it hurting the hands, I believe it just happens if you use the cover too tight, and I don’t think It’s the best way to use it because probably will also reduce the lifespan of the cover. Even a bit loose it will prevent the control slide from your hands. But if you will use the grip a bit loose, for security, also use the original protection cable (like the photo).

Great upgrade for the Quest 3 controls
Not sure how I’d use the Q3 controls without these grip straps, tbh. The integrated wrist loops on the controllers themselves are useless, and I’ve never liked the feel of them anyway. But with these AMVR wraps, you get a fairly comfortable hand strap that keeps your controls close to your hands without dangling, but with enough freedom (if you don’t tighten them too much) to not feel too strapped into anything. Some good thought was put into the battery compartment solution, and it actually makes it easier to swap out batteries than Meta’s built-in solution, which says a lot for this AMVR brand, but not a lot for Meta. (For what they charge, you’d think they’d not be beaten by a very cost effective accessory.)The material of these grips also has a very premium feel. Not too rubberized, not too smooth, just right for their purpose and easy enough to keep clean. One downside is personally I feel my hands built up more sweat with these than the bare controllers, but ymmv. Bottom line I’d rather use the Q3 controls with these than without. Solid 4.5/5 for me.

Almost perfect, but poor positioning on the straps leads to bad aim
Definitely an upgrade from no straps. However, I have an issue with where the strap is. In games, I find that where I point is slightly more to the left of where the game thinks I am pointing. This is because the straps are too far forward. Rather they need to come back like half an inch so that the controller rotates more to align with where the game hands are vs your hands.If you have it already, do a test. Point your finger forward and then touch your finger with your other hand. Compare where that is to where the finger points in the game. I guarantee you it is a few inches to the left off of where the game finger is.Doesn’t seem like a big deal until you start shooting in games and miss because your actually pointing off a bit.

Pricey, but high quality
It’s very nice and durable. Gripped tightly when I used it for intense exercise.Its easy to replace the battery (disposable battery).

Nice covers if you need more grip on controllers
These are great grip covers for Quest 3 controllers. I needed something that felt more stable for working out when I get a little sweaty. They are pretty easy to remove when I want to put my controller in my golf accessory too.

Nickel
Parfait dommage qu’il ne soit pas compatible avec la station d’accueil officiel

Best choice for first upgrade
It took less than ten seconds to figure out that these grips are as important if not more important than changing out the head strap on the quest 3.

Super Comfy
Easy to install. Fit snugly all over. Much more comfy to hold that standard controller. Probably one of my favorite purchases as far as accessories go!

Super Griffe, gefallen mir besser als die von Kiwi
Für meine Quest 2 hatte ich die Griffe von Kiwi und war durchaus zufrieden, aber diese hier von AMVR für die Quest 3 sind nochmal deutlich besser. Die Batterieklappe ist nett, aber der Tragekomfort der Schlaufen ist bei AMVR überraschenderweise viel angenehmer, auch wenn zumindest optisch kaum Unterschiede bestehen.Jede Hand ist natürlich anders, aber für meine Hände sind diese Griffe perfekt – 5/5, Kaufempfehlung 🙂

Muy bueno, buen agarre y perfectamente acoplado
El producto es muy bueno, me llego en buenas condiciones, y se acoplo perfectamente a los controles de la quest3, lo recomiendo

A must have for long sessions.
Great solution for those wanting more security in their gameplay and to be able to relax your hands a bit from time to time. Fit well, easy to adjust, and no tracking issues after 20 hours of use.

Good quality
Works as expected, it’s firm and easy to install. Worth the money

A must
Really great! I can workout in vr without the fear of launching a controller into orbit.

Besserer Halt und liegt gut in der Hand
Eine Empfehlung zum Nachrüsten. Bei BeatSaber wurden meine Hände immer etwas feucht und somit rutschig. Dies ist mit dieser Ergänzung nunmehr abgestellt. Außerdem liegen die Controller besser in der Hand. Sehr zu empfehlen!

Good grips and soft
These definitely helped the incredibly slippery quest 3 controllers. I don’t know why Microsoft doesn’t add some sort of grip to the controllers but these help. Assembly is easy. The only cons I have are the knuckle straps should be be longer. These can be too tight for big hands. I have to bend the leather part of the strap so they fit better. Also, the plastic piece you put on first is very tough to take out if you need to. I noticed the wrist strap fell off after I installed the first piece. Getting that piece off was a worrying process to not break it Overall, decent and they work.

These are great should be how these come
Love these use them every time I play.

Game changer!
Absolutely love this things. No further do I have to maintain my death grip on my controllers. It’s so nice just having them stay in place. Additionally, the battery door is much appreciated!

Just what I neededI upgraded to the Quest 3 and was really surprised at how chintzy the controllers were. They are very slippery, if it weren’t for the strap they would go flying across the room.I went on a search for new grips. I came upon these AMVR grips, these actually work well. They grip and prevent the controllers from slipping. Very limited supplies of accessories but these work for me. The only issue I have is where the buckle connects on the top of the hand. I seems like with extended playtime this will rub on the hand being irritating

ComfortableEasy to fit and comfortable. Battery changing is also made far easier with these grips.